Sure Power 24-Volt 300-Amp Integrated Solenoid & Control Module powRparts

Sure Power Interconnect Controller 

The Sure Power 3103 Interconnect Controller is a 24 volt, 300 Amp integrated solenoid and control module for 14 volt systems.

The 3103 is a 300A integrated solenoid and control module for 14V systems. The unit features a biostable solenoid that can remain open or closed without a coil current draw. The unit can be utilized in four different modes of operation based on settings of jumpers external to the unit.

SPECIFICATIONS

• Voltage : 24 Volts
• Amperage : 300 Amps
• Approx. Weight : 2 Pounds

Modes of Operation
Listed below are the many different functions of this product.

Unidirectional Battery Separator : 300 Amp
This mode is used to charge two batteries from one power source. In this mode, the unit monitors the “main” battery. When the main battery voltage is above the connect threshold, the solenoid connects the two batteries together. When the main battery voltage drops below the disconnect threshold, the solenoid is opened. In this mode, the connect threshold is usually set to a voltage that is only reached when the charging system is operational. This will cause the solenoid to only close when the charging system is operational, charging both batteries. The RCM pin must be grounded in a battery separator application.

Bidirectional Battery Separator : 300 Amp
This mode is used to charge two batteries from two sources. In this mode, both batteries are monitored. If either battery is above the connect threshold the unit will close the solenoid. If the batteries are below the disconnect threshold the unit will open the solenoid. The voltage settings for the bi-directional battery separator remain the same as the unidirectional battery separator. The RCM pin must be grounded in a battery separator application.

Low Voltage Disconnect (LVD) :
In this mode, the unit monitors the battery voltage. When the battery voltage drops below the disconnect voltage, the unit opens the solenoid, removing power from the load. The solenoid closes, powering the load.

Isolator / Interconnect Mode :
This mode is used to charge two batteries from one power source. This mode provides the advantages of both the isolator charging system and the battery interconnect.

Manufacturer Profile : Sure Power Industries
Sure Power Industries (now part of Eaton/Cooper Bussmann) provides a wide variety of quality products and engineering services designed to aid in the management of DC electrical systems. Since inventing the Battery Isolator in 1959, Sure Power has been designing and manufacturing innovative, reliable and cost competitive products and services for a wide variety of markets including off-highway, bus, and truck, marine and automotive.